| |
|
|
|
Custom
Designed
Swim / Dive
Platforms
Order Directly From the
Manufacturer
"Made in USA by American Craftsmen in St. Petersburg, Fl."
| |
|
We
design and fabricate new, replacement, or redesigned
Swim / Dive Platforms. Should you have a
need for this item, we can accommodate your
requirements. We will work with you to assure that
the Swim / Dive Platform will be appropriate for your application
and conform to the contour of your boat as we have for other satisfied customers.
Please use the on-line
contact form, send an email
teakmarine@tampabay.rr.com, or give us a call
(727) 510-3198
to set up
an appointment to discuss your application and to obtain an estimate.
Oiled Finish
Below are several
examples of our work applicable from small power boats
to larger yachts which are
available only via special order.
Shown
below the custom order versions are three (3) styles and
several sizes that are available via
our on-line shopping cart. |
|
|
|
|
|
| |
-
Custom designed to fit the contour of your boat and mounting
brackets.
-
View the following examples of our design/fabrication
capabilities.
-
Standard thickness = 1-1/2"
-
Other thicknesses are available upon request.
-
Solid Teak
-
Oiled Finish
|
|
| |
We do not maintain templates of boat transom curves;
thus, please be prepared to provide
either a template or
dimensional definition of your
transom curve so we can prepare a template.
The following Adobe PDF File is a suggested method of obtaining
the dimensions which
defines your boat's transom curve.
"Platform Curve Layout
Guide" |
|
"Yacht Style" Swim Platform Examples
"Yacht Style" Fabrication Technique
Assembled with SS Screws,
Waterproof Glue,
& SS Threaded Through Rods. |
Applying Peripheral Molding |
| |
|
Rounding Over all Edges, Top &
Bottom |
Application of Penetrating Oil |
Completed Swim Platform - Ready For Shipment
Link To "Platform Brackets"
& "Boarding Ladders"
|
|
|
"Yacht Style" Swim Platform
Being Prepared for Shipment |
|
|
|
| |
Custom 24" x 36" x 1-1/2" w/Oiled Finish
The above items are available only via
custom order.
Please call (727)
510-3198,
send us your detailed requirements via email
teakmarine@tampabay.rr.com,
or via the
on-line form.
|
|
|
Also available are
Platforms for smaller I/O
Powered Boats
Order Directly From the
Manufacturer
"Made in USA by American Craftsmen in St. Petersburg, Fl."
The following Styles & Sizes are available via our on-line
shopping
cart.
Style "B"
is furnished with the curve to fit your transom at no additional cost.
You furnish the dimensions and we do the rest.
________________________________________________________________________________
We do not maintain templates of boat transom curves;
thus, please be prepared to provide
either a template or
dimensional definition of your
transom curve so we can prepare a template.
The following Adobe PDF File is a suggested method of obtaining
the dimensions which
defines your boat's transom curve.
"Platform Curve Layout
Guide"
_________________________________________________________________________________
|
Two Styles to choose from.
Oiled Finish
Standard Sizes are:
|
Style "A"
Part No S7801 -
72" W Back (63" Front) x 22" D x 1-1/2" Thick
Part No S7802 -
80" W Back (71" Front) x 22" D x 1-1/2" Thick
Part No S7803 -
90" W Back (80" Front) x 22" D x 1-1/2" Thick
Other sizes are
available via custom order.
Please use the on-line
contact form,
send an email
teakmarine@tampabay.rr.com,
or give us a call(727) 510-3198
to set up
an appointment to discuss your application and to obtain an estimate.
|
Style "B"
Part No S7804 -
72" W Back (63" Front) x 22" D x 1-1/2" Thick
Part No S7805 -
80" W Back (71" Front) x 22" D x 1-1/2" Thick
Part No S7806 -
90" W Back (80" Front) x 22" D x 1-1/2" Thick
Other sizes
are available via custom order.
Please use the on-line
contact form,
send an email
teakmarine@tampabay.rr.com,
or give us a call(727) 510-3198
to set up
an appointment to discuss your application and to obtain an estimate.
|
|
|
|
|
Platforms for smaller Outboard
Powered Boats
Order Directly From the
Manufacturer
"Made in USA by American Craftsmen in St. Petersburg, Fl."
|
| |
|
Oiled Finish |
Oiled Finish |
 |
 |
| 18' & 24" |
36" |
|
|
|
|
Standard Sizes are:
Part No S7901 -
18" W x 16" D x 1" Thick
Part No S7902 -
24" W x 18" D x 1" Thick
Part No S7903 -
36" W x 20" D x 1" Thick
Other sizes
are available via custom order.
Please use the on-line
contact form,
send an email
teakmarine@tampabay.rr.com,
or give us a call(727) 510-3198
to set up
an appointment
to discuss your application and to obtain an estimate.
Link To "Platform Brackets"
& "Boarding Ladders"
|
|
| |
|
