Provided By
S & P Custom, Inc.


  A/C GRILLES
BOARDING LADDERS
COMPANIONWAY SLATS
CONTACT US
COUNTERTOPS
CUSTOM CABINETS
CUSTOM FABRICATIONS
DOORS - CABINET
DOORS - ENTRY
DOORS - INTERIOR
DOORS - OUTDOOR KITCHEN		 DRAWER UNITS
ENCLOSURES
FLOOR GRATING
HAND RAILS
MOLDING - HATCH
MOLDING - WINDOW
INTERIORS
PLATFORM BRACKETS
PULPITS
PROJECT EXAMPLES		 SHOWER/STEAM BATH SEATS
SLIDING HATCH COVERS
SPINDLE RAILS
STAIR TREADS
SWIM/DIVE PLATFORMS
TABLES


  HOME
ABOUT US
SITE MAP		 LOCAL RESOURCES
NAUTICAL TERMS		 ONLINE POLICY
TEAK INFO
SHOPPING CART		  
     
 
 


Installing a Prefabricated Teak Deck
     
 
  • Take deck out of box and dry fit.
  • Begin prep work, start at the bow, at the hatch
  • Lift up one piece of deck at a time
  • Wash fiberglass with acetone and clean away any dirt
  • Tape off all edges with blue tape
  • Spread epoxy on bottom of teak (to groove thickness on bottom of trowel)
  • Lay epoxied deck pieces carefully in place
  • Wipe away any excess epoxy immediately
  • Anchor down deck with water filled buckets every foot
  • Repeat steps 1 - 9 until bow is complete. Then repeat on next section working towards the stern.
  • Final sanding of taped seams, start at the bow and work towards stern.
  • All sanding should be complete, start cleaning all epoxy, caulking or imperfections from bow to stern
  • Clean up is complete, start detail seaming in cabin side and edge of deck. One person tape and the other person seam. One team of two on each starboard and port sides. Pull up all tape when complete.
  • Final check for detailing and clean up.
 
 
 
 


Visit our On-Line Shopping Cart

  
 

Online Payments


 

Website designed and maintained by
S & P Custom, Inc.


S & P Custom, Inc.
 575 45th Ave. S.
St. Petersburg, Fl. 33705
 Telephone:  (727) 510-3198
FAX (727 823-8808
Email:  teakmarine@tampabay.rr.com

 To report errors or make recommendations on this website
please contact:
 webmaster@teakmarinewoodwork.com